Gilman Mine, Gilman, Colorado Archive Search Results
Showing
61 - 80
of 114
, query time: 0.02s
61. Main cage
Format:
Image
Inspection and maintenance on the main cage at the Gilman Mine. Safety clamps are evident in the center of the shaft on the cage.
62. Cyanide mixing
Format:
Image
Cyanide mixing machine in the mine at Gilman. Cyanide was shipped to the mine in 50 gallon drums and required the use of rubber gloves in handling.
Format:
Image
The cyanide injecting machine inside the mill at Gilman. Cyanide was used to clean the ore for processing. A pressure gauge is seen at the top of the injectors.
Format:
Image
Electrically activated shaft weights in the mill section at Gilman Mine.
65. Tamping dynamite
Format:
Image
Tamping in dynamite prior to blasting a section at Gilman. Holes that have been prepared are shown with electrical connections to the blasting caps and the dynamite. Joe Fear prepared the blasting caps on the surface. Bottom series of holes were detonated first to keep the miners from having to work so much loose debris - a true demonstration of the principle of gravity.
Format:
Image
Inserting dynamite into a drill hole prior to blasting at Gilman.
67. Timber truck
Format:
Image
John Mignone (left) and Jesse Belt examining a reconditioned timber truck at the Gilman mine.
68. Incline hoist
Format:
Image
W.C. "Bill" May, at left,from the electrical shop, and O.A. McClain, from the machine shop, discussing the general reconstruction of an incline hoist to be used in the mine. This entire hoist except for the drum and bull wheel is being reconstructed in the shop.
Format:
Image
O.A. McClain, left, watches as Jessie Belt shears bar steel for timber truck reinforcements. The extra stock of bar steel is in the backgound.
70. O. A. McClain
Format:
Image
O.A. McClain standing near equipment manufactured in Chicago and New York for the Gilman Mine.
71. Rebuilt mine car
Format:
Image
O.A. McClain and Roy Long standing beside a completely rebuilt mine car at the Gilman Mine. An "eye" is seen with chains attached at the bottom of the cart. The eye was used to hook the mine cars together in a series of small trains for hauling ore.
Format:
Image
Casts for pouring bearings in the mill. The idea of the machine shop and mill was to make the Gilman Mine as self sufficient as possible in terms of repair and renovation of equipment.
Format:
Image
Flotation area for the zinc ore. Water valves are shown at the bottom of the table.
74. Fine crusher
Format:
Image
Secondary or fine crusher in the Gilman Mine.
Format:
Image
Lee Ferris lubricating a bearing on the main cage at the Gilman Mine.
The safety manager was a very important part of the mining team. Safety was stressed constantly through regular meetings and signs placed throughout the mine.
Format:
Image
Ed Koch welding a repair on a "yellow car", a rocker dump car, which dumped ore to the side. The frame and wheels can be seen in the lower front foreground.
77. Flotation area
Format:
Image
Floation area for the zinc ore at Gilman. Flotation tables were used to seperate the zinc and lead from the waste in the mining process. Further processing separated the lead and the zinc.
Format:
Image
Staff meeting at the Gilman Mine. Left to right, Harold Steinmeyer, Gordon Craig, Frank Maloit, Bob Radabaugh, Dick Sayers, Bill Jude.
Format:
Image
Bob Radabaugh, mine geologist, at the Gilman Mine. The geologists determined areas of optimum ore yield through various methods of inquiry. Bob is shown with one of the low tech methods, the rock hammer, checking the rock formation.
80. Drilling
Format:
Image
Drilling prior to adding dynamite to blast a section for mining at Gilman. Protective clothing was worn to keep the driller from being injured by debris, but we see no eye safety wear.