Denver and Rio Grande Western Railroad Company. Archive Search Results
Showing
1 - 18
of 18
, query time: 0.02s
Format:
Image
The 20-stall standard-gauge roundhouse was constructed in 1900, east of the narrow-gauge roundhouse. By the date of this photograph, August 1, 1923, a new eight-stall roundhouse addition was being constructed as a separate building; however it shared the 100-foot turntable with the original standard-gauge roundhouse. The 100-foot turntable replaced the original 80-foot turntable in 1917. Forms were set up to pour concrete for locomotive service pits,...
Format:
Image
Denver & Rio Grande locomotive No. 83 was in use here as a switch engine, and was posed on the mainline, with the rebuilt machine shop behind. Notice the front and rear arc headlamps in use on this Baldwin engine, the last Class 56 narrow-gauge 2-8-0 to be built, having entered service in 1881. The engine’s pilot truck had been removed, which converted No. 83 into an 0-8-0.
Alice Chinn Collection.
Format:
Image
Denver & Rio Grande Engine No. 106 with crew in the Salida railyards.
Bob Rush Collection.
Format:
Image
Trees on Tenderfoot Mountain are alive and well when this photograph was taken March 20, 1895. They began dying shortly after the smelter opened – upwind – in 1902, and by 1917 there were almost none left. Two foot paths up the mountain were used by hundreds of visitors who wanted to get a view of the city while they waited to change trains. The mountain was a favorite picnic spot for locals as well.
The Denver & Rio Grande Depot, F Street...
Format:
Image
Denver & Rio Grande Western Panoramic Special, ca. 1920.
Leonard Perschbacher Collection.
Format:
Image
Denver & Rio Grande locomotive #1063. Image taken by John Kratky.
Josephine Soukup Collection.
Format:
Image
The depot and railyard, viewed from across the Arkansas River, near where Riverside Park is located today.
Alice Chinn Collection.
Format:
Image
Rotary snowplow on Monarch Pass ca. 1907. John Ophus Collection.
Format:
Image
All 27 roundhouse tracks and nearly half of the Salida roundhouse itself, are visible in this photograph, taken sometime between 1890 and 1892. Nearly half of the stalls carry four rails to handle both gauges. The 62-foot turntable was used until 1909, when it was replaced with an 80-foot model. Moving counter-clockwise from the roundhouse lead nearest the photographer, the following locomotives are visible:
• narrow-gauge Engine 62, a Baldwin...
Format:
Image
Fire destroyed 17 locomotives in the roundhouse and shops December 11, 1892, including Nos. 404 and 285 which were in for major repairs and couldn’t be moved. The blaze gutted 14 of 17 roundhouse stalls before city and D&RG firemen and about 100 volunteers could bring it to a halt. Low water pressure, rotten hoses, and freezing weather made fire fighting a nightmare, but there were no major injuries. Volunteers managed to save 20 locomotives and...
Format:
Image
Foundations for the roundhouse, Salida, Colorado, dated August 1, 1923. The 20-stall standard-gauge roundhouse was constructed in 1900, east of the narrow-gauge roundhouse. By the date of this photograph, August 1, 1923, a new eight-stall roundhouse addition was being constructed as a separate building; however it shared the 100-foot turntable with the original standard-gauge roundhouse. The 100-foot turntable replaced the original 80-foot turntable...
Format:
Image
Photo of the Denver & Rio Grande Western Depot and the Monte Cristo Hotel, taken by John Kratky, who lived in Salida between 1912-1920.
Josephine Soukup Collection.
Format:
Image
The 20-stall standard-gauge roundhouse was constructed in 1900, east of the narrow-gauge roundhouse. By the date of this photograph, August 28, 1923, a new eight-stall roundhouse addition was being constructed as a separate building; however it shared the 100-foot turntable with the original standard-gauge roundhouse. The 100-foot turntable replaced the original 80-foot turntable in 1917. Forms were set up to pour concrete for locomotive service pits,...
Format:
Image
Denver & Rio Grande No. 168, photo taken between 1900 – 1902. Henry Harvard Haley is on the right.
Haley-Bratton Collection.
Format:
Image
The 20-stall standard-gauge roundhouse was constructed in 1900, east of the narrow-gauge roundhouse. In this photograph, dated August 28, 1923, a new eight-stall roundhouse addition was being constructed as a separate building; however it shared the 100-foot turntable with the original standard-gauge roundhouse. The 100-foot turntable replaced the original 80-foot turntable in 1917. Forms were set up to pour concrete for locomotive service pits, and...
Format:
Image
A major fire occurred in Salida's Denver & Rio Grande Railroad facilities in December 1892, destroying fourteen stalls in the roundhouse, seventeen locomotives, and the machine shops. Railroad employees and citizens managed to save twenty locomotives, but damages were estimated at $400,000.
In 1900, nearly $350,000 in improvements were completed, including work on the roundhouse and other facilities of the D & R G and construction of a new D & R...
Format:
Image
Shortly after the disastrous 1892 fire, locomotive servicing and repairs had to be done out in the open, in front of the roundhouse ruins. From this angle, the machine shop was at the left, and the charred boiler-house roof was visible beside the stack. Prior to the fire, the arch in the roundhouse doors had been bricked up. The 62-foot turntable was still in use. A standard-gauge switch engine, an 1890 Class 113 (C-28) Baldwin 2-8-0 in the 600-series,...
Format:
Image
The Denver & Rio Grande Locomotive Repair Shop became the Wm. L. Poller Company in the mid-1950s. These images were taken by Joe Morris of Morris Photo Studio on January 15, 1955.
This image is from the Salida Museum Negatives Collection.